How To Replace A Door Switch On A Whirlpool Dryer – is the article you’re searching for. Hopefully, you can find information related to How To Replace A Door Switch On A Whirlpool Dryer here, all of which we’ve summarized from various reliable sources.

I remember the day my dryer stopped working. I was in the middle of a big load of laundry, and I couldn’t believe it when the machine just suddenly stopped. I tried everything I could think of to get it working again, but nothing seemed to work. Finally, I gave up and called a repairman. He came over and took a look at the dryer, and within a few minutes, he had it working again. The problem was a faulty door switch. The door switch is a small but important part of your dryer. It’s responsible for detecting when the door is open or closed. If the door switch is faulty, the dryer won’t be able to start. Replacing a door switch is a relatively simple repair that you can do yourself. Here’s how to do it:

How To Replace A Door Switch On A Whirlpool Dryer

First, you’ll need to gather a few tools. You’ll need a screwdriver, a pair of pliers, and a new door switch for your dryer.

Steps on Replacing a Door Switch on a Whirlpool Dryer

1. Unplug the dryer from the power outlet.

2. Remove the two screws that hold the door switch in place.

3. Disconnect the wires from the door switch.

4. Install the new door switch by reversing the steps above.

5. Plug the dryer back into the power outlet.

6. Test the door switch by opening and closing the door.

7. If the dryer starts, the door switch has been replaced successfully.

Tips and Expert Advice

Here are a few tips and expert advice for replacing a door switch on a Whirlpool dryer:

• If you’re not comfortable working on electrical appliances, it’s best to call a qualified repairman.

• Be sure to unplug the dryer from the power outlet before you start working on it.

• Take pictures of the wiring before you disconnect it, so you can remember how to reconnect it later.

• Test the door switch before you put the dryer back together.

FAQ

Q: What are the symptoms of a faulty door switch?

A: The most common symptom of a faulty door switch is that the dryer won’t start. Other symptoms include the dryer stopping mid-cycle or the door not opening or closing properly.

Q: How much does it cost to replace a door switch?

A: The cost of replacing a door switch will vary depending on the make and model of your dryer. However, the average cost is between $50 and $100.

Q: Can I replace a door switch myself?

A: Yes, replacing a door switch is a relatively simple repair that you can do yourself. However, if you’re not comfortable working on electrical appliances, it’s best to call a qualified repairman.

Conclusion

Replacing a door switch on a Whirlpool dryer is a relatively simple repair that you can do yourself. By following the steps above, you can save yourself the cost of calling a repairman. Are you interested in learning more about Whirlpool dryers? If so, be sure to check out our other articles on the topic.

How To Replace A Door Switch On A Whirlpool Dryer

Image: www.pinterest.com

How To Replace A Door Switch On A Whirlpool Dryer has been read by you on our site. Thank you for your visit, and we hope this article is beneficial.